AudioCodes mediapack MP-500 User Manual page 392

Parameter
Web: SAS Registration Manipulation Table
EMS: Stand-Alone Survivability
[SASRegistrationManipulation]
[SASEmergencyPrefix]
Web: SAS IP-to-IP Routing Table
[IP2IPRouting]
SIP User's Manual
This ini file table parameter configures the SAS Registration
Manipulation table. This table is used by the SAS application to
manipulate the User-Part of an incoming REGISTER request AoR
(the To header), before saving it to the registered users database.
The format of this table parameter is as follows:
[SASRegistrationManipulation]
FORMAT SASRegistrationManipulation_Index =
SASRegistrationManipulation_RemoveFromRight,
SASRegistrationManipulation_LeaveFromRight;
[\SASRegistrationManipulation]
RemoveFromRight = number of digits removed from the right
side of the User-Part before saving to the registered user
database.
LeaveFromRight = number of digits to keep from the right
side.
If both RemoveFromRight and LeaveFromRight are defined, the
RemoveFromRight is applied first. The registered database
contains the AoR before and after the manipulation.
The range of both RemoveFromRight and LeaveFromRight is 0 to
30.
Note: This table can include only one index entry.
Defines a prefix that is added to the Request URI user part of the
INVITE message that is sent by the device's SAS agent when in
Emergency mode to the default gateway or to any other
destination (using the 'IP2IP Routing' table). This parameter is
required to differentiate between normal SAS calls routed to the
default gateway and emergency SAS calls. Therefore, this allows
you to define different manipulation rules for normal and
emergency calls.
This valid value is a character string. The default is an empty
string "".
This ini file table parameter configures the IP-to-IP Routing table
for SAS routing when in Emergency SAS mode. The format of
this parameter is as follows:
[IP2IPRouting]
FORMAT IP2IPRouting_Index = IP2IPRouting_SrcIPGroupID,
IP2IPRouting_SrcUsernamePrefix, IP2IPRouting_SrcHost,
IP2IPRouting_DestUsernamePrefix, IP2IPRouting_DestHost,
IP2IPRouting_DestType, IP2IPRouting_DestIPGroupID,
IP2IPRouting_DestSRDID, IP2IPRouting_DestAddress,
IP2IPRouting_DestPort, IP2IPRouting_DestTransportType,
IP2IPRouting_AltRouteOptions;
[\IP2IPRouting]
For example:
IP2IPRouting 1 = -1, *, *, *, *, 0, -1, -1, , 0, -1, 0;
Notes:
This table can include up to 120 indices (where 0 is the first
392
Description
Document #: LTRT-12801
MP-500 MSBG