Table of Contents
Advertisement
SIP User's Manual
To load (or restore) the ini file:
1.
To load the Voice ini file to the device, perform the following:
a.
Click the Browse button, navigate to the folder in which the ini file is located,
select the file, and then click Open; the name and path of the file appear in the
field beside the Browse button.
b.
Click the Load INI File button, and then at the prompt, click OK; the device
uploads the ini file and then resets (from the cmp version stored on the flash
memory). Once complete, the 'Enter Network Password' dialog box appears,
requesting you to enter your user name and password.
2.
To load the Data configuration ini file to the device, perform the following:
a.
Under the 'Send the Data Configuration file to the device' group, click the Browse
button, navigate to the folder in which the file is located, select the file, and then
click Open; the name and path of the file appear in the field beside the Browse
button.
b.
Click the Send File button, and then at the prompt, click OK; the device uploads
the file and then resets (from the cmp version stored on the flash memory). Once
complete, the 'Enter Network Password' dialog box appears, requesting you to
enter your user name and password.
Version 5.8
245
3. Web-Based Management
October 2009
Advertisement
Table of Contents
Troubleshooting
