SIP User's Manual
Using INFO message according to Korea mode: DTMF digits are carried to the
remote side in INFO messages. To enable this mode, define the following:
•
RxDTMFOption = 0 (ini file); 'Declare RFC 2833 in SDP' field = 'No'
•
TxDTMFOption = 3 (ini file); '1
Note that in this mode, DTMF digits are erased from the audio stream
(DTMFTransportType is automatically set to 0 (DTMF Mute)).
Notes:
The following parameters affect the way the device handles the DTMF digits:
TxDTMFOption, RxDTMFOption, and RFC2833PayloadType
MGCPDTMFDetectionPoint, DTMFVolume, DTMFTransportType, DTMFDigitLength,
and DTMFInterDigitInterval (refer to ''Channel Parameters'' on page 425)
Version 5.8
•
The device is always ready to receive DTMF packets over IP in all
possible transport modes: INFO messages, NOTIFY, and RFC 2833 (in
proper payload type) or as part of the audio stream.
•
To exclude RFC 2833 Telephony event parameter from the device's
SDP, set RxDTMFOption to 0 in the ini file.
to 5
Tx DTMF Option' field = 'INFO (Korea)'
st
th
491
9. IP Telephony Capabilities
October 2009