AudioCodes mediapack MP-500 User Manual page 198

Parameter
Web: Stripped Digits From
Left
EMS: Number Of Stripped
Digits
[_RemoveFromLeft]
Web: Stripped Digits From
Right
EMS: Number Of Stripped
Digits
[_RemoveFromRight]
Web: Prefix to Add
EMS: Prefix/Suffix To Add
[_Prefix2Add]
Web: Suffix to Add
EMS: Prefix/Suffix To Add
[_Suffix2Add]
Web/EMS: Number of Digits
to Leave
[_LeaveFromRight]
Web: Presentation
EMS: Is Presentation
Restricted
[_IsPresentationRestricted]
3.4.5.9.2 Mapping NPI/TON to SIP Phone-Context
The 'Phone-Context Table' page is used to map Numbering Plan Indication (NPI) and Type
of Number (TON) to the SIP Phone-Context parameter. When a call is received from the
Tel, the NPI and TON are compared against the table and the matching Phone-Context
value is used in the outgoing SIP INVITE message. The same mapping occurs when an
INVITE with a Phone-Context attribute is received. The Phone-Context parameter appears
in the standard SIP headers where a phone number is used (Request-URI, To, From,
Diversion).
SIP User's Manual
single digits. For example: 10.8.8.xx represents all IP addresses
between 10.8.8.10 to 10.8.8.99.
The source IP address can include the asterisk (*) wildcard to
represent any number between 0 and 255. For example, 10.8.8.*
represents all IP addresses between 10.8.8.0 and 10.8.8.255.
Number of digits to remove from the left of the telephone number
prefix. For example, if you enter 3 and the phone number is 5551234,
the new phone number is 1234.
Number of digits to remove from the right of the telephone number
prefix. For example, if you enter 3 and the phone number is
5551234, the new phone number is 5551.
The number or string that you want added to the front of the
telephone number. For example, if you enter '9' and the phone
number is 1234, the new number is 91234.
The number or string that you want added to the end of the telephone
number. For example, if you enter '00' and the phone number is
1234, the new number is 123400.
The number of digits that you want to retain from the right of the
phone number.
Determines whether Caller ID is permitted:
Not Configured = privacy is determined according to the Caller ID
table (refer to ''Configuring Caller Display Information'' on page
214).
Allowed = sends Caller ID information when a call is made using
these destination / source prefixes.
Restricted = restricts Caller ID information for these prefixes.
Notes:
Only applicable to Number Manipulation tables for Tel-to-IP
source number manipulation.
If 'Presentation' is set to 'Restricted' and 'Asserted Identity Mode'
is set to 'P-Asserted', the From header in the INVITE message
includes the following: From: 'anonymous' <sip:
anonymous@anonymous.invalid> and 'privacy: id' header.
198
Description
Document #: LTRT-12801
MP-500 MSBG