Show Command - HPE AlphaServer 300 User Manual

Show Command

The show command displays the current value of a specified environment or displays
information about the system.
The syntax of the show command is:
show [{config, device, map, memory, pal, version, <envar>...}]
The show command options are described in Table 3-5. Environment variables are listed
in Table 3-6.
Table 3-5 SRM Show Command Options
Command Option
config
device [device name]
<envar>
error
map
memory
pal
version
3-12 AlphaServer 300 User's Guide
Description
Displays the current memory configuration, PCI logical
slots, and ISA logical slots (based on ISACFG utility input
to the configuration database).
Displays the devices and controllers in the system.
Specifying a device name returns information on that
device only.
Displays the value of the environment variable specified.
Displays error log information.
Displays the system virtual memory map.
Displays the memory module configuration.
Displays the version of OpenVMS and Digital UNIX
PALcode.
Displays the version of the console firmware.