Adding Isa Options To Openvms And Digital Unix Systems - HPE AlphaServer 300 User Manual

Adding ISA Options to OpenVMS and Digital UNIX Systems

When you need to add more than one ISA option of the same type to an AlphaServer 300
system running the OpenVMS or Digital UNIX operating system, perform the procedure
shown in Table 3-10.
Table 3-10 Adding Options to OpenVMS or Digital UNIX Systems
Step Action
1 >>>isacfg options
2
>>>init
3 Configure the ISA option.
4 Turn off the system and install the
ISA option.
5 Turn on the system and boot.
3-22 AlphaServer 300 User's Guide
Result or Next Step
Adds the new ISA option to the SRM console
configuration table using the appropriate
command options.
Typing init allows the changes to be used.
Use the manual that came with your ISA
option to set the proper configuration.
Refer to Chapter 4.
The operating system boots and sees the new
ISA option.