HPE AlphaServer 300 User Manual page 69

__________________________ HINT_____________________________
When you install drives in the bracket, or when you cable those drives, you may
find it convenient to rest the bracket on top of the power supply.
____________________________________________________________
4. Orient the bracket as Figure 4-13 shows. Position the drive so that cable connections
face to the rear of the system. Select the bracket mounting holes that match the
threaded holes in the drive. Mount the drive in the bracket, securing it with the four
screws provided with the drive.
Figure 4-13 Installing Drives in Bracket
MLO-009861
Installing System Options 4-19