HPE AlphaServer 300 User Manual page 108

Table C-2 Setting Up Partitions for a Windows NT Server Installation
(continued)
Step Action
7 Select the desired target device.
8 Enter the desired partition size of
your "C" drive minus 6 MB.
9 Press any key to continue.
10 Enter n and press return.
11 Press any key to continue.
12 Choose
Create Partition
13 Select the desired target device.
14 Enter 6 MB as the desired partition
size of your "D" drive.
15 Press any key to continue.
16 Enter y and press return.
17 Press any key to continue.
18 Select Exit.
19 Select Exit.
C–4 AlphaServer 300 User's Guide
Result
A prompt for partition size displays. The system
partition should be 6 MB.
Partition successfully created.
Do you want to make this the system partition
(y/n)?
Partition formatted successfully.
Configure Partitions menu re-displays.
A list of available target devices displays.
A prompt for partition size displays.
Partition successfully created.
Do you want to make this the system partition
(y/n)?
Partition formatted successfully.
Configure Partitions menu re-displays.
ARCINST menu displays.
ARC Boot menu displays.