HPE AlphaServer 300 User Manual page 103

Type the following:
3.
>>>boot -fl 0,A0 dka400 or
>>>boot -fl 0,A0 dkb400
(Either device can be used)
The system displays the following:
I
NIT-S CPU. . .
AUDIT_CHECKSUM_GOOD
AUDIT_LOAD_BEGINS
AUDIT_LOAD_DONE
BOOTFILE:
Enter the name of the PCI update directory and filename:
4.
BOOTFILE: [ALPHA200]AS200_PCI_V1_2.EXE
_________________________ NOTE_____________________________
The file name may change with new firmware releases. Refer to the
documentation that comes with the Alpha Firmware Update CD-ROM.
____________________________________________________________
The boot file is loaded and the system displays the PCI Loadable Firmware Update Utility
banner, utility commands, and then the UPD> prompt.
*** PCI Loadable Firmware Update Utility V1.2 ***
--------------------------------------------------------------
Function Description
--------------------------------------------------------------
Display Displays the system's configuration table
Exit Done exit LFU (reset.)
List Lists the device, revision, firmware name, and
update revision
Update Replace current firmware with loadable data
image
Verify Compares loadable and hardware images.
? or Help Scrolls this function table.
--------------------------------------------------------------
UPD>
5. Enter the following to list the devices and revisions:
UPD> list
B–6 AlphaServer 300 User's Guide