Before Starting Your System - HPE AlphaServer 300 User Manual

Before Starting Your System

Before starting your system, perform the following steps:
1. Read and understand the information supplied with your system.
2. Select a well-ventilated site near a grounded power outlet and away from sources of
excessive heat. The site should also be isolated from electric noise (for example,
spikes, sags, and surges) produced by devices such as air conditioners, large fans,
radios, and televisions.
3. Save all shipping containers and packing material for repackaging or moving the
system later.
_________________________ NOTES ____________________________
1. Do not install optional hardware or application software until you have
started your system and verified that the base system is working correctly.
2. On systems that have preloaded software, a label attached to the system unit
informs you that licensed software has been installed. Carefully review the
software license agreement shipped with your system.
____________________________________________________________
________________________WARNING___________________________
When unpacking and moving system components, be aware that some
components (such as the system unit or monitor) may be too heavy for you
to safely lift alone. If you are doubtful about whether you can lift these
items alone, please get assistance.
____________________________________________________________
2-2 AlphaServer 300 User's Guide