HPE AlphaServer 300 User Manual page 48

Table 3-9 SRM ISACFG Command Options (continued)
Command Option
-etyp <#>
-handle <string>
-init
-iobase{0-5} <#>
-irq{0-3} <#>
-membase{0-2} <#>
-memlen{0-2} <#>
-mk
-mod
-rm
-rombase <#>
-romlen <#>
-slot <slot#>
-totdev <#>
Description
Defines an entry type for this entry. The # sign can be:
0 - Causes the entry to be deleted
1 - Single option
2 - Embedded multiport device
3 - Multiport option device
Binds a name to the driver (up to 15 characters).
Initializes the configuration table to the default settings.
Specifies up to six I/O base registers (in hexadecimal) for a
particular device entry.
Allows you to assign up to four IRQ (interrupt request) channels
to the device (use decimal IRQ levels).
Specifies up to three R/W ISA memory regions.
Specifies the length corresponding to membase{0-2}.
Adds an entry into the table.
Modifies an entry in the table.
Deletes an entry from the table.
Specifies an address for ISA BIOS ext. ROM.
Specifies length of ROM.
Allows you to enter a unique slot number for each ISA adapter.
You may assign the numbers in any order. The slot number does
not relate to a physical ISA adapter position. Slot 0 is reserved
for the local multiport adapter.
Placeholder for you to keep track of the total number of devices,
specified by the # sign, at this slot. Modify this for your own
use.
Console Commands 3-21