HPE AlphaServer 300 User Manual page 61

2
1
Figure 4-5 Installing an Expansion Board
__________________________NOTE ____________________________
The bottom ISA slot accepts only half-size ISA cards.
____________________________________________________________
3. Unscrew and remove the metal filler plate for the slot you have chosen.
4. Insert the new expansion board into the riser board slot. Push the board firmly into the
socket.
5. Replace the screw to secure the module at the rear panel.
__________________________NOTE ____________________________
For ISA options added to Digital UNIX or OpenVMS systems, run the ISA
Configuration Utility (from the SRM console prompt, type ICONFIG). See
Chapter 3, Console Commands, for more information on this utility.
____________________________________________________________
For more information on operating system-specific options, refer to your
operating system documentation.
Installing System Options 4-11