Connecting System Parts - HPE AlphaServer 300 User Manual

Connecting System Parts

To connect the components of your AlphaServer 300 system, perform the following steps:
1. Confirm that the voltage selector switch matches your local voltage (either 115 volts
or 230 volts), as Figure 2-3 shows.
Figure 2-3 Voltage Selector Switch
________________________ CAUTION___________________________
Improper voltage selection can damage the system's power supply.
____________________________________________________________
2. Ensure that the power switch is in the off (out) position. Refer to your system's
Installation Information for a view of the positions of this switch.
3. Connect the mouse, keyboard, video cable, and power cords to the system
components, as Figure 2-4 shows.
115V
230V
Getting Started 2-5