Playback Configuration; Manage Sessions - Agilent Technologies FieldFox N9913A User Manual

FieldFox Data Flow and Record Playback data points
 Data can be recorded at the Raw Meas block where data is acquired after
 Data can be recorded from Traces 1,2,3, or 4 which includes the trace state
 Recording from a Clear/Write trace yields exactly the same data as recording
 Data is ALWAYS played back at the same location in the data flow: just after
 See an example using Record Playback with Max Hold traces on page 126.

Playback Configuration

By default, trace sweeps are played back as fast as the trace can be drawn on the
screen. The following setting allows you to slow playback. In addition, you can
manually scroll through individual traces using Playback Trace, or scroll through
State and User Tags using Playback State/Tag. Learn more in How to Playback a
Session on page 122.
To slow playback of a session
 Record a new session or Open an existing session.
 Press
 Then
 Enter a value in seconds between 0 (no delay) and 100 using the numeric
 Press

Manage Sessions

 Press Trace 6
 Then
The following selections are available ONLY when a session is NOT open.
 Then
Interference Analyzer (SA Mode) Option 236
ResBW, VideoBW, and Detector processing, but before any trace state
processing.
(Max Hold, Min Hold, and so forth.
from the Raw Meas block.
the Raw Meas block, through all currently active Traces, and onto the display.
Playback Configuration
Playback Interval
keypad, ▲|▼ arrows, or the rotary knob. After using the keypad, select a
multiplier key. Learn about multiplier abbreviations on page 19.
Enter
Record Playback Setup
Storage Device
to select the media which stores the sessions to be
managed. This is a different setting from the Save/Recall Storage Device
setting.
125