Table of Contents
Advertisement
Additional Information
Message
Software update failed.
(3996 0BBB)
Software update failed.
(3996 0BBB)
Restart the system.
Administrative rights are
required for this operation.
Invalid Operation.
This site is not an MCU site.
Invalid Operation.
Content is being shared.
Invalid Operation.
USB recording is in progress.
There is a problem with the
USB
flash drive write speed.
Replace the USB flash drive.
Invalid Operation.
Not enough free space on
USB
flash drive.
Invalid Operation.
The device is in USB Device
Mode.
Invalid Operation.
The function needs activation.
Registration Page of KX-VC Series NAT Traversal Service
Basic Operation
Problem
The language displayed on
the screen is a foreign
language.
218
User Manual
•
The USB memory device does not contain the appropriate firmware.
•
The firmware is incorrect.
→
Confirm that the correct firmware is saved to the USB memory device.
For details about the firmware, contact your dealer.
•
The operation has been restricted in the administrator menu.
→
Contact your network administrator.
•
A menu option that cannot be executed is selected.
→
During a one-to-one connection video conference, operations for a
multiple-party video conference call cannot be performed.
•
A menu option that cannot be executed is selected.
→
When contents are being shared using single-stream communication
during a multiple-party video conference call using a built-in MCU, at
the Main Site the communication menu items "Make a call" and "Main
Position set." cannot be selected.
•
An operation or menu option that cannot be executed during USB
recording is selected.
→
Operate after stopping USB recording.
•
An error has occurred when writing the recording data.
→
The write speed of a USB memory device may decline due to
deterioration over use in long periods or other causes. Replace the USB
memory device. If you continue recording without replacing the USB
memory device, recorded images may be corrupted or cut out.
•
There is insufficient free space in the connected USB memory device.
→
Connect a USB memory device with sufficient free space according to
your required recording time and quality. For the required amount of
free space of different qualities, refer to Page 184.
•
You cannot make or receive calls or use a USB memory device while
in USB Device Mode.
→
Set "USB Device Mode" to "OFF" (Page 133).
•
A menu option that cannot be executed unless the feature is enhanced
is selected.
→
Confirm the required activation key (Page 20) and refer to
"Enhancement" (Page 158) to enhance the feature. For details,
contact your dealer.
•
The language setting is incorrect.
→
In the upper right of the login screen, select your preferred language
from the drop-down list (Page 166).
Cause and Solution
Cause and Solution
Document Version 2018-01
Advertisement
Table of Contents
