Table of Contents
Advertisement
Starting a Video Conference
3
Select the party you want to call using [
Note
•
If you press [ENTER], the call history details
screen is displayed. (Not displayed when the
profile history or multicast call history (outgoing)
is selected.)
•
When not selecting a local site (Page 113), the
values of the basic settings are displayed for
"Local site name".
•
"Bandwidth" displays the mediated bandwidth
for connected sites.
•
Depending on the other party, "Device type"
may be blank.
•
When using a KX-VC1000 that has not been
expanded for 4 Point Built-in MCU support,
"Profile ID" is not displayed.
4
Press [START].
•
The manual dial screen is displayed. (Not displayed
when the multicast history was selected.)
Note
•
You can change the number of sites called
or edit the other party's address.
5
Press [START] to start the call.
6
When you want to end the call, press [END].
•
The Home screen is displayed.
62
User Manual
][
].
Document Version 2018-01
Advertisement
Table of Contents
