Connecting The Kx-Tvp50 With The Panasonic Kx-Ta Series; Kx-Ta Series Software Verification And Programming For Digital Integration Via The Manager's Extension - Panasonic KX-TVP50 Installation Manual

Voice processing system
Hide thumbs Also See for KX-TVP50:
Table of Contents

Advertisement

4.2 CONNECTING THE KX-TVP50 WITH THE PANASONIC KX-TA series

4.2 CONNECTING THE KX-TVP50 WITH THE
PANASONIC KX-TA series
4.2.1 KX-TA series Software Verification and Programming for
Digital Integration via the Manager's Extension
It is important that the KX-TA series has the proper software level to allow Digital Integration
with the VPS. Follow the procedures below to confirm the software level, then complete the
required programming before starting up the VPS.
All of the following procedures must be done after entering system programming. Refer
to the KX-TA series Installation Manual for instructions on how to enter the system
programming mode.
Software Verification
1.
Check the software version of the KX-TA series using System Program [998].
Example: Y581BYYMMDD(M)
The underlined digits represent the software production date code (year, month, day). For
Digital Integration, the software version of the PBX must be Y581B or higher.
If the software version of the PBX is lower than this, consult your dealer.
From the SYS-PGM NO ? screen:
a)
Enter [998].
b)
Press the NEXT button (SP-PHONE). The system displays the ROM version and the
date it was created.
This version must be Y581B or higher for Digital Integration to be utilised.
2.
Set the date and time using System Program [000].
Date and time are automatically synchronised between the VPS and the Panasonic KX-TA
series during initial setup.
3.
Assign the Voice Mail Port. This program tells the PBX which jacks will be connected to
the VPS. This allows the PBX to send the proper Digital Integration information to those
ports. Jack 07, or jacks 07 and 08 can be assigned for the VPS1 as the Voice Mail Port. Jack
15, or jacks 15 and 16 can be assigned for the VPS2.
• KX-TVP50 (2 ports): assign max. 2 jacks
58
INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOGUE PBX AND KX-TD DIGITAL PBX

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents