Table of Contents
Advertisement
Contacts and Settings
5.
Use [
][
] to select "Yes" and press [ENTER].
•
The profile list screen is displayed.
6.
Press [Home].
•
The Home screen is displayed.
Setting the Profile Standby
When an incoming call is received during standby, the
specified conference registered to the profile is started.
Note
•
Even in the profile standby settings, there are
no restrictions to the call operations (such as
how to make calls and addresses) during
standby.
•
During profile standby settings, if another profile
standby is configured, the first profile standby
that was configured is removed.
•
For profiles that have "Entry Restriction" set
to "ON", calls are answered and conferences
are started with profile settings only if there is a
call from the sites registered in "Site".
•
The profile standby setting is set as standby for
the selected local site (page 113) from the
moment it is set, and is only enabled while that
local site is selected. If the local site is changed,
the profile standby is also changed to the
content of the changed local site while that local
site is selected.
1.
Press [MENU].
•
The Menu screen is displayed.
2.
Use [
][
] to select "Profile" and press
[ENTER].
•
The profile list screen is displayed.
3.
Use [
][
] to select the profile standby you want
to use.
Note
•
The ""Not Registered"" line cannot be
selected.
4.
Press [G].
•
A dialogue box for setting or removing profile
standby is displayed.
112
User Manual
5.
Use [
][
] to select "Temporary" or
"Permanent".
•
The profile list screen is displayed and a "ü" is
displayed in the "Standby" column for the
profile with a standby set.
Note
•
If "Temporary" is selected, the profile
standby setting is removed if the unit is
restarted. If "Permanent" is selected, the
profile standby setting is kept even after
restarting the unit.
•
If [BACK] is pressed, profile standby is not
set and the display is returned to the profile
list screen.
6.
Press [Home].
•
The Home screen is displayed.
Removing a Profile Standby
1.
Press [MENU].
•
The Menu screen is displayed.
2.
Use [
][
] to select "Profile" and press
[ENTER].
•
The profile list screen is displayed and a "ü" is
displayed in the "Standby" column for the
profile with a standby set.
3.
Use [
][
] to select the profile standby you want
to remove.
4.
Press [G].
•
A dialogue box for setting or removing profile
standby is displayed.
5.
Use [
][
] to select "Release".
•
The profile list screen is displayed and a "ü" is
deleted from the "Standby" column for the
profile with a standby removed.
Note
•
If [BACK] is pressed, profile standby is not
removed and the display is returned to the
profile list screen.
6.
Press [Home].
•
The Home screen is displayed.
Document Version 2018-01
Advertisement
Table of Contents
