Table of Contents
Advertisement
Contacts and Settings
–
"Partially Hide": Everything is hidden
except for the control name and the remote
control's colour button.
–
"Fully Hide": All of the guide area is hidden.
"Admin Login Disp. of "Y" Button": Use [
[
] to select whether to display "Admin Login" in
[Y] of the menu screen.
–
"ON" (default): Displays "Admin Login".
–
"OFF": Does not display "Admin Login".
""Y" Button during MCU": Press [ENTER] and
use [
][
] to assign a feature to the [Y] button
during MCU.
–
"Whisper Mode": Turns Whisper Mode on and
off.
–
"Discussion / Presentation" (default):
Switches the MCU mode.
""G" Button during call": Press [ENTER] and use
[
][
] to assign a feature to the [G] button during
calls.
–
"Aspect Ratio" (default): Changes the
incoming image aspect ratio during a 2-party
video conference call.
–
"USB Rec": Starts and stops recording during
a call.
""CAM CTRL" Button": Use [
"ON" (default) or "OFF".
•
When "OFF" is selected, the [CAM CTRL]
button cannot be used during a video
conference call.
"Edit Contact list": Use [
"ON" (default) or "OFF".
•
If you select "OFF", items in the contact list
cannot be added, edited, or deleted.
"Edit Profile": Use [
"ON" (default) or "OFF".
•
If you select "OFF", items in the profile cannot
be added, edited, or deleted.
3.
Press [G].
•
A dialogue box to confirm the saving of settings
is displayed.
4.
Use [
][
] to select "Yes" and press [ENTER].
•
The administrator menu screen is displayed.
Making HDMI Settings
1.
Select "HDMI Settings" and press [ENTER].
•
The HDMI settings screen is displayed.
154
User Manual
][
] to select
][
] to select
][
] to select
2.
Use [
][
"One Touch Play": Use [
"OFF" (default).
Note
]
•
Normally, select "OFF". Changing this
settings to "ON" may cause the image to
change automatically depending on the
model of the connected video camera.
"Standby": Use [
or "OFF".
Note
•
Depending on the connected video camera,
changing this settings to "ON" may cause
the video camera (Main, Sub) to
synchronise and enter screen standby
mode when the unit enters screen standby
mode. Since operation may differ
depending on your video camera model,
contact your dealer for details.
3.
Press [G].
•
A dialogue box to confirm the saving of settings
is displayed.
4.
Use [
][
•
The administrator menu screen is displayed.
Setting Power Management
Power management can be set to automatically turn the
HD Visual Communication Unit on or off at specified
times. You can select to turn on or off at a specific day
and time, or turn on or off at the same time every day.
Note
•
A dialogue box to confirm turning off the unit is
displayed about 60 seconds before the time set
for automatic power off.
Use [
[ENTER].
–
If you select "Yes", the unit turns off without
waiting for the set time.
–
If you select "No", the unit will turn off at the
next set time rather than the nearest set
time.
If you do not press [ENTER] within 60 seconds,
the unit will turn off at the set time.
•
If the time set from automatic power off to
automatic power on is less than 5 minutes, the
unit will restart instead of turning off and on. In
] to select the following items for input:
][
] to select "ON" or
][
] to select "ON" (default)
] to select "Yes" and press [ENTER].
][
] to select "Yes" or "No" and press
Document Version 2018-01
Advertisement
Table of Contents
