Table of Contents
Advertisement
Using Multicast
3.
Press [B].
•
The multicast tree setting screen is displayed.
4.
Use [
][
] to select the following items for input:
"Multicast Name": Enter the multicast tree name (maximum 24 characters) (Page 190).
"Max. Bandwidth": Press [ENTER] and use [
multicast (1.0/1.2/2.0/3.0/4.0/5.0 Mbps) (default: 5.0 Mbps).
Note
•
All terminals registered to the multicast tree must have twice the available bandwidth as set in
"Max. Bandwidth".
•
In "Call set up", the values for "Max. Bandwidth", "Max. Bandwidth Per Site", "Max.
Bandwidth Per Site (LAN 1)", and "Max. Bandwidth Per Site (LAN 2)" have no effect on the
maximum bandwidth used for multicasting.
"Max. Resolution": Press [ENTER] and use [
Note
•
When the bandwidth of the connection used during the multicast drops, the resolution and/or frame
rate of the multicast data may lower.
"Multicast Default Video": Press [ENTER] and use [
starts.
–
"Main Camera" (default): The video of the main camera is sent.
–
"Sub Camera": The video of the sub camera is sent.
–
"PC": The image of the PC is sent.
Note
•
Performing contents sharing operations can change the video being sent during a multicast
(Page 89).
"Multicast Def. Noise reduction": Use [
multicast starts.
–
"ON" (default): Noise reduction is enabled.
–
"OFF": Noise reduction is disabled.
Note
•
"Multicast Def. Noise reduction" is not displayed for the KX-VC1000.
"MIC detection": Use [
–
"ON": Displays the microphone status.
–
"OFF" (default): Hides the microphone status.
176
User Manual
][
][
] to select whether noise reduction is enabled when the
][
] to select the microphone status display.
] to select the maximum bandwidth to be used for the
][
] to select "Full HD" (default) or "HD".
][
] to select the video to send when the multicast
Document Version 2018-01
Advertisement
Table of Contents
