Table of Contents
Advertisement
During Video Conference Calls
Reducing Microphone Noise
You can reduce the amount of ambient noise picked up by the microphone (shuffling of papers, etc.) during a
video conference call. When noise reduction is in effect, the volume level of voices may also be reduced.
1
Press [Y].
•
"Whisper Mode [ON]" is displayed, and noise
reduction is enabled.
•
Pressing [Y] again will display "Whisper Mode
[OFF]", and noise reduction is disabled.
Note
•
Noise reduction is available only when Digital
Boundary Microphones are connected.
•
You can set whether to enable noise reduction
for a video conference call before starting the
call (Page 123).
•
After a video conference call is finished, the
noise reduction setting returns to the value set
before starting the call.
•
When ""Y" Button during MCU" in "GUI
Settings" is set to "Discussion /
Presentation", you can switch the MCU mode
by pressing the [Y] button during calls that use
the MCU (except for KX-VC1000) (Page 154).
•
This feature is disabled for KX-VC1000, and
noise reduction is not displayed on the [Y] button
in the shortcut key area. If the unit has been
expanded for 4 Point Built-in MCU support, the
option to change the MCU mode is assigned to
the [Y] button during video conferences that use
the MCU.
88
User Manual
1
Document Version 2018-01
Advertisement
Table of Contents
