Table of Contents
Advertisement
–
"Other / Content": Displays the image of the
other party using HDMI1, and your own site's
shared contents using HDMI2.
–
"Content / Content": Displays the image of
your own site's shared contents using HDMI1
and HDMI2.
"Layout 2 (Switching video)": Press [ENTER]
and use [
][
] to select the display method when
contents are shared during dual stream
communication.
–
"Content / Other" (default): Displays your own
shared contents using HDMI1, and the image of
the other party using HDMI2.
–
"Other / Content": Displays the image of the
other party using HDMI1, and your own site's
shared contents using HDMI2.
–
"Content / Content": Displays the image of
your own site's shared contents using HDMI1
and HDMI2.
"Output of HDMI 3" (KX-VC1600/KX-VC2000):
Press [ENTER] and use [
output to HDMI3.
–
"Local site video" (default): Outputs your own
site's image to HDMI3.
–
"Rec (HDMI 1 / LR-Split)": Split the signals of
HDMI1 for video and audio recording,
outputting L (other sites' audio) and R (your own
site's audio) to HDMI3.
–
"Rec (HDMI 1 / LR-Mix)": Combine the signals
of HDMI1 for video and audio recording,
outputting L (other sites' audio) and R (your own
site's audio) to HDMI3.
–
"Rec (HDMI 2 / LR-Split)": Split the signal of
HDMI2 for video and audio recording,
outputting L (other sites' audio) and R (your own
site's audio) to HDMI3.
–
"Rec (HDMI 2 / LR-Mix)": Combine the signals
of HDMI2 for video and audio recording,
outputting L (other sites' audio) and R (your own
site's audio) to HDMI3.
Note
•
When your own site's image is selected,
use the video camera at a resolution of
1080p/1080i. 720p cannot be used.
"Analog compo. video output" (KX-VC1600/
KX-VC2000): Press [ENTER] and use [
select settings for analogue component output.
–
"Same as HDMI 1" (default): Outputs an
analogue component signal that is the same
image as for HDMI1.
Document Version 2018-01
][
] to select the
][
] to
–
"Same as HDMI 2": Outputs an analogue
component signal that is the same image as for
HDMI2.
"Max. Resolution" (KX-VC1600/KX-VC2000):
Press [ENTER] and use [
"1080i" (default) or "1080p".
Note
•
The set maximum resolution that will be
applied will be for analogue component
output and an HDMI output equivalent to
analogue component.
"Display position of local site": Press [ENTER]
and use [
][
] to select the picture-in-picture
(PinP) display position of your site's image.
–
"Upper right" (default): Your image is
displayed at the upper-right part of the screen.
–
"Lower right": Your image is displayed at the
lower-right part of the screen.
–
"Upper left": Your image is displayed at the
upper-left part of the screen.
–
"Lower left": Your image is displayed at the
lower-left part of the screen.
Note
•
For the KX-VC1300 or KX-VC1600, or a
KX-VC1000 that has been expanded for
HDMI Dual Monitor, when "HDMI 1 / HDMI
2" is selected in "Video Output", PinP is
not available.
•
By pressing [R] during video conference
calls, you can move your own image
clockwise from the preset position ("PinP"
is displayed for the [R] guideline). You can
stop displaying your own image by pressing
[BACK].
3.
Press [G].
•
A dialogue box to confirm the changing of
settings is displayed.
4.
Use [
][
] to select "Yes" and press [ENTER].
•
The administrator menu screen is displayed.
Contacts and Settings
][
] to select
User Manual
151
Advertisement
Table of Contents
