Table of Contents
Advertisement
Starting a Video Conference
When using NAT Traversal mode: the connection number
1.
Press [G].
•
A dialogue box to select either the contact list or call history is displayed.
2.
Use [
3.
Use [
•
For the contact list, you can use [
the displayed tab (Page 53).
•
For the call history, press [G] to switch between the incoming call history and the outgoing call
history.
4.
Press [ENTER].
•
When using H.323, you can also call by entering the other party's IP address (or host name) %H.323
extension (or H.323 name).
•
When the called party was selected from the contact list, the site name for the other party is displayed.
•
When the called party was selected from the call history, selecting a contact by their displayed site
name in the history will display the site name for the other party.
•
For a party that is displaying a site name, the site name can be changed when inputting letters and
numbers directly by pressing [Y] to delete the site name and then input it.
58
User Manual
][
] to select the contact list or call history, and then press [ENTER].
][
] to select the contact you want to refer to.
][
] or the numeric buttons of the remote control to select
Document Version 2018-01
Advertisement
Table of Contents
