Table of Contents
Advertisement
Deleting Registered Contents
1.
In step 7 of "Administrator Menu List (Page 136)", select "Multicast Tree Set." and press [ENTER].
•
The multicast tree screen is displayed.
2.
Use [
][
] to select the multicast tree to delete.
3.
Press [R].
•
A dialogue box to confirm the deletion is displayed.
4.
Use [
][
] to select "Yes" and press [ENTER].
•
The multicast tree screen is displayed.
Starting a Multicast
Starting a Multicast
Select a multicast tree from the list of up to 10 preset multicast trees (1–10) and start the multicast.
1.
In step 7 of "Administrator Menu List (Page 136)", select "Multicast Tree Set." and press [ENTER].
•
The multicast tree screen is displayed.
2.
Use [
][
] to select the multicast tree to use for the multicast.
3.
Press [START].
•
The multicast preparation screen is displayed, and when connection confirmations for lower-level
terminals are completed, the multicast will start.
Note
•
If [END] is pressed during multicast preparation, the multicast will be cancelled.
•
If no response is received from a lower-level terminal for a connection confirmation for
approximately 1 minute, the multicast tree will adjust and then the multicast will start.
4.
To end the multicast, press [END].
Starting a Multicast by Selecting the Multicast Target
Select a multicast target from the multicast target list registered in advance to the multicast tree, and start the
multicast.
1.
In step 7 of "Administrator Menu List (Page 136)", select "Multicast Tree Set." and press [ENTER].
•
The multicast tree screen is displayed.
2.
Use [
][
] to select the multicast tree to use for the multicast, and press [B].
•
The multicast tree setting screen is displayed.
Document Version 2018-01
Using Multicast
User Manual
179
Advertisement
Table of Contents
