Table of Contents
Advertisement
Contacts and Settings
–
"OFF": Rejects incoming calls.
Note
•
When "Incoming Call from a non-regist." is set to "ON", "HDVC Incoming Call", "HDVC Mobile
Incoming Call", and "Save denied call to History" are not available.
"HDVC Incoming Call": When "Incoming Call from a non-regist." is set to "OFF", use [
whether to allow incoming calls from HD Visual Communication Unit/HDVC-MPCS.
–
"ON": Allows incoming calls.
–
"OFF" (default): Rejects incoming calls.
"HDVC Mobile Incoming Call": When "Incoming Call from a non-regist." is set to "OFF", use [
[
] to select whether to allow incoming calls from HDVC Mobile (Page 171).
–
"ON": Allows incoming calls.
–
"OFF" (default): Rejects incoming calls.
"Incoming Call Authentication": Use [
authentication number.
•
"ON": Performs authentication.
•
"OFF" (default): Does not perform authentication.
Note
•
When "Incoming Call Authentication" is set to "OFF", you cannot set "Authentication
Number", "HDVC Authentication", and "HDVC Mobile Authentication".
•
You cannot use authentication features for incoming calls from communication through a SIP server
or H.323 gatekeeper.
•
When "Incoming Call from a non-regist." is set to "OFF" and "Incoming Call
Authentication" is set to "ON", you will receive incoming calls if either one of the conditions for
allowing incoming calls is met.
"Authentication Number": If "Incoming Call Authentication" is set to "ON", set a 6 to 20 digit number.
Note
•
A terminal making a call must input the same number as "Authentication Number" with the
conference room number.
Outgoing call number example) When the authentication number is "123456"
(Correct) 123456@192.168.0.1
(Wrong) 12345678@192.168.0.1
If the terminal making a call is another company's terminal, a different string may be used instead
of "@" (example: 123456##192.168.0.1).
The authentication number is recognized as "123456" even in this case.
"HDVC Authentication": If "Incoming Call Authentication" is set to "ON", use [
whether to authenticate incoming calls from HD Visual Communication Units/HDVC-MPCS.
•
"ON" (default): Performs authentication.
•
"OFF": Allows incoming calls without authentication.
"HDVC Mobile Authentication": If "Incoming Call Authentication" is set to "ON", use [
whether to authenticate incoming calls from HDVC Mobile.
•
"ON" (default): Performs authentication.
•
"OFF": Allows incoming calls without authentication.
"Save denied call to History": When "Incoming Call from a non-regist." is set to "OFF" or "Incoming
Call Authentication" is set to "ON", use [
–
"ON" (default): Saves calls.
–
"OFF": Does not save calls.
148
User Manual
][
] to select whether to authenticate incoming calls with an
][
] to select whether to save rejected calls to the call history.
][
] to select
]
][
] to select
][
] to select
Document Version 2018-01
Advertisement
Table of Contents
