Panasonic KX-VC1000 User Manual page 46

Hd visual communication unit
Hide thumbs Also See for KX-VC1000:
Table of Contents

Advertisement

Preparation
Note
If the icon shows only 0–1 bars continuously, contact your network administrator.
During multiple-party video conference calls, the icon is displayed on each site screen, but not on
your own image.
You can set whether to display the icon. This setting affects all displayed images (excluding your
own image) (Page 123). For example, if icon display has been enabled, the icon will be displayed
on the image of all other parties, but not on your own image. However, if icon display has been
disabled, the icon will not be displayed on any of the images. Regardless of icon display settings,
the icon is not displayed while the combined computer/video feed screen is being displayed.
Other Site's Audio Indication (
Displayed on the Main Site when "Other Site's Audio" is set to "Mute" during a multiple-party video
conference call using the built-in MCU (Page 81, Page 108).
Dialling Indication (
Displayed when a call is incoming at another site, such as when a site is added during a call or when a call
is made (Page 67).
Presentation Mode Indication (
Displayed for the main site for video conference calls with multiple connections that use an internal MCU
when MCU mode is Presentation Mode (Page 77, Page 108, Page 124).
Recording icon (
Displayed when recording (Page 82, Page 132).
Status Indication
The status of the unit is indicated by icons (Page 43).
Note
Pressing [FULL SCREEN] on the remote control will hide or unhide the other party's information,
duration, icon display area
If a black line is displayed on the left of a site in the dialogue box for site selection during a call, it
indicates that the site has the lowest bandwidth. If there are two types of communication groups due
to "Secondary Bandwidth Selection" (Page 126), a black line is displayed on the site with the lowest
bandwidth for each group.
Example: when Paris has the lowest bandwidth
*1
If the icons in the icon display area have been set to not be displayed, pressing [FULL SCREEN] will not show the icon.
46
User Manual
)
)
)
)
, and guide displays.
*1
Document Version 2018-01

Advertisement

Table of Contents
loading

Table of Contents