Table of Contents
Advertisement
the date format (Month/Day/Year, Day/Month/
Year, Year/Month/Day) and the hour display
format (12h/24h).
13.
Press [G].
14.
Select "Yes" using [
•
The network settings screen is displayed.
15.
Use [
][
] to select the following items for input:
Note
•
For the KX-VC1000/KX-VC1300, "IP
Address (LAN 1)" (setting), "IP Address
(LAN 1)", and "Subnet mask (LAN 1)" are
respectively displayed as "IP
Address" (setting), "IP Address", and
"Subnet mask".
"IP Address (LAN 1)"(setting): Use [
select whether the IP address information for this
unit ("IP Address (LAN 1)", "Subnet mask (LAN
1)", "Default Gateway") will be obtained
automatically from a DHCP server or will be set
manually.
–
"Auto" (default): Obtain the IP address
information automatically.
–
"Manual": Set the IP address information
manually.
Document Version 2018-01
][
], then press [ENTER].
][
] to
Note
•
Even if you have selected "Auto", you still
may not be able to acquire an IP address
due to problems such as network
congestion. In this case, "Address is not
assigned" is displayed in the upper right of
the Home screen. Contact your network
administrator.
"IP Address (LAN 1)": Enter the IP address of the
unit.
"Subnet mask (LAN 1)": Enter the subnet mask.
"Default Gateway": Enter the IP address of the
default gateway.
Note
•
"IP Address (LAN 1)", "Subnet mask
(LAN 1)", and "Default Gateway" can be
entered only if "IP Address (LAN
1)" (setting) is set to "Manual".
•
If the value for "IP Address (LAN 1)",
"Subnet mask (LAN 1)", or "Default
Gateway" contains 1 or 2 digits numbers,
enter these numbers as they are. Do not
enter like [.001].
Example: The IP address is [192.168.0.1].
–
Correct entry: [192.168.0.1]
–
Wrong entry: [192.168.000.001]
"DNS Server": Use [
IP address information for the DNS servers
("Primary DNS Server", "Secondary DNS
Server") will be obtained automatically from a
DHCP server or will be set manually.
–
"Auto" (default): Obtain the IP address
information automatically.
–
"Manual": Set the IP address information
manually.
Note
•
To select "Auto", "IP Address (LAN
1)" (setting) must be set to "Auto".
•
The DNS server must be set to use KX-VC
Series NAT Traversal Service, to check for
upgrades, and to download the latest
software from the network.
"Primary DNS Server": Enter the IP address of the
primary DNS server.
"Secondary DNS Server": Enter the IP address of
the secondary DNS server.
Note
•
"Primary DNS Server" and "Secondary
DNS Server" can be entered only if "DNS
Server" is set to "Manual".
Preparation
][
] to select whether the
User Manual
49
Advertisement
Table of Contents
