Table of Contents
Advertisement
Screen Display
Home Screen (Idle Screen)
Displayed when the power is turned on. Also displayed when the [Home] button is pressed on the remote
control.
G
F
Main Video Camera Image
Displays the video from the main video camera.
Unit Information
The information displayed differs depending on the selected connection mode (Page 142).
IP Mode: The connection mode, local site name, the SIP user name (if using a SIP server)/H.323 extension,
H.323 name (if using a gatekeeper), LAN1 IP address, LAN2 IP address (KX-VC1600/KX-VC2000),
maximum bandwidth, encryption status indication icons, Static NAT status indication icon (if using the Static
NAT feature), Local Camera Display of MCU Site icon, Profile standby icon, and Incoming Call from a
non-regist. icon.
NAT Traversal Mode: The connection mode, local site name, Terminal ID, maximum bandwidth, encryption
status indication icons, Local Camera Display of MCU Site icon, Profile standby icon, and Incoming Call
from a non-regist. icon.
IP/NAT Traversal Mode: The connection mode, local site name, Terminal ID, LAN1 IP address, LAN2 IP
address (KX-VC1600/KX-VC2000), maximum bandwidth, encryption status indication icons, Static NAT
status indication icon (if using the Static NAT feature), Local Camera Display of MCU Site icon, Profile
standby icon, and Incoming Call from a non-regist. icon.
Note
•
When selecting a local site (Page 113), the selected local site's information is displayed. The local
site's set device name is displayed. The information displayed differs depending on the local site's
connection mode.
•
If the local site name, SIP user name, H.323 extension, or H.323 name is too long to display, it will
be shortened and ended with "...".
Document Version 2018-01
A
E
Preparation
B
C
D
User Manual
41
Advertisement
Table of Contents
