Using USB Device Mode
Using USB Device Mode
You can use a video camera or microphone connected to the HD Visual Communication Unit as a video camera
or microphone for calls in general conference applications installed on a computer.
Note
•
Use the activation key of the PC Peripheral (KX-VCZ501) to enable USB Device Mode. Also, refer to
"Setting the USB Device Mode (Page 132)" to switch modes and configure related settings.
•
You cannot make or receive calls while in USB Device Mode
standby mode.
•
You cannot connect a USB memory device to the USB jack and use it while in USB Device Mode
*1
USB Device Mode is when "USB Device Mode" is set to "ON" (Page 133), regardless of whether or not the unit is connected
to a computer.
About Connections
Connect the computer and HD Visual Communication Unit as shown below.
Note
•
Make sure to use the proprietary USB conversion cable (PGWD1933ZAJ1) included with the activation
key (KX-VCZ501).
USB cable connections
USB cable (commercially available)
PC
USB [A] male
About Specifications
The following are the main specifications.
Item
Video
Standard
Video format
Resolution
186
User Manual
USB cable
(commercially available)
HDMI cable (commercially available)
USB [B] male
UVC Version 1.0
Motion JPEG
640 ´ 480 (maximum 30 fps
1280 ´ 720 (maximum 15 fps
. The unit will also not enter screen
*1
Proprietary USB conversion cable
(included with KX-VCZ501)
Proprietary USB conversion cable
(included with KX-VCZ501)
USB [B] female
Specification
)
*1
)
*2
HD Visual
Communication
Unit
USB [A] male
Document Version 2018-01
.
*1