Table of Contents
Advertisement
•
If "Obtain automatically" is displayed, the
WAN IP address cannot be set. For details,
contact your dealer.
"Local address judgement": Press [ENTER] and
use [
][
] to select "OFF" (default) or "Auto".
–
"OFF" (default): Static NAT is applied to all
addresses.
–
"Auto": Static NAT is not applied to private
addresses.
"Conversion IP and Port Num.": Use [
select "ON" or "OFF" (default).
Note
•
When using a router that features
Symmetric NAT to connect to a mobile
device, select "ON".
•
When "ON" is selected, configure static
NAT settings for the unit and the router that
the unit is connected to.
"RTP and RTCP for Audio": Enter the initial port
number (5100–5108/5100–5164/5100–5188) for
RTP and RTCP for Audio (default: 5100).
"RTP and RTCP for Video": Enter the initial port
number (5200–5208/5200–5264/5200–5288) for
RTP and RTCP for Video (default: 5200).
"Camera Control": Enter the initial port number
(5300–5308/5300–5364/5300–5388) for controlling
a video camera (default: 5300).
"RTP and RTCP for Video (Sub)": Input the sub
image RTP/RTCP port number (5400–5408/5400–
5464/5400–5488). (default: 5400)
"BFCP": Input the BFCP initial port number (5800–
5876/5800–5890/5800–5895). (default: 5800)
"SIP": Enter the port number for 2-party video
conference calls (5000–5099) for communication
using a SIP server (default: 5060).
Note
•
The changed port number will be displayed
on the unit information screen (Page 104).
"H.245": Enter the initial port number for H.245
(5500–5550/5500–5580/5500–5590) (default:
5500).
Note
•
For the following items, a number will be
automatically added to the initial port
number that you enter. The total number
indicates the range and values of available
port numbers for the items.
–
"RTP and RTCP for Audio"
–
"RTP and RTCP for Video"
–
"Camera Control"
Document Version 2018-01
3.
Press [G].
•
A dialogue box to confirm the saving of settings
is displayed.
4.
Use [
•
The administrator menu screen is displayed.
][
] to
Making Call Type Settings
1.
Select "Call Type Settings" and press [ENTER].
•
The call type settings screen is displayed.
2.
Use [
"SIP": Use [
"OFF".
Note
•
•
"H.323": Use [
"OFF".
Note
•
"Priority for connection mode": Press [ENTER]
and use [
(SIP)" (default), "IP Mode (H.323)", or "NAT
Traversal Mode".
Note
•
3.
Press [G].
•
A dialogue box to confirm the saving of settings
is displayed.
Contacts and Settings
–
"RTP and RTCP for Video (Sub)"
–
"BFCP"
–
"H.245"
][
] to select "Yes" and press [ENTER].
][
] to select the following items for input:
][
] to select "ON" (default) or
When "OFF" is selected, you cannot use a
SIP server even if "ON" is set to "SIP
Server" (Page 144).
If the other party is using the KX-VC300/
KX-VC600 with a software version older
than 3.00 (not including 3.00), you cannot
make a video conference call using H.323.
You must select "ON".
][
] to select "ON" (default) or
When "OFF" is selected, you cannot use a
gatekeeper and H.460 even if "ON" is
selected for "Gatekeeper" and "H.
460" (Page 145).
][
] to select "IP Mode
The communication type selected here will
be reflected onto the device's settings such
as its displayed contents and default
connection mode values for making calls.
User Manual
143
Advertisement
Table of Contents
