During Video Conference Calls
Changing the Other Party's Screen Display Layout
During a video conference call, you can change the other party's screen display layout. The numbers in the
layout configurations indicate each site's image display priority. (Hereafter, the display with priority 1 will be
described as the "main display".)
Note
•
When using a KX-VC1000 that has not been expanded for 4 Point Built-in MCU support, "Screen
mode set." is not displayed in the communication menu.
Main Site operations
1.
Press [MENU].
•
The communication menu screen is displayed.
2.
Use [
][
][
•
The layout settings dialogue box is displayed.
3.
Press [ENTER], use [
–
"Auto": Automatically changes the layout depending on the number of parties joining a video
conference call and the MCU mode (Page 77, Page 108, Page 124).
–
"CP1" to "CP28": Changes to the selected layout.
4.
Use [
][
] to select "Done" and press [ENTER].
Layout according to the number of sites when "Auto" is selected (Discussion Mode)
Number of Sites
2
3–4
5–6
7–8
9
10
11-13
14-15
16
17-20
72
User Manual
][
] to "Screen mode set." and press [ENTER].
][
] to select a layout to set, and then press [ENTER].
Layout Number
CP1
CP4
CP6
CP8
CP9
CP10
CP13
CP15
CP16
CP20
Document Version 2018-01