Table of Contents
Advertisement
Starting a Video Conference
Calling by Entering an Address Directly
When using IP mode, you can make a video conference call by entering the IP address (or host name), SIP
URI (or SIP user name), H.323 extension, H.323 name, or MCU's conference room number@IP address.
When using NAT Traversal mode, you can make a call by entering the connection number.
Note
•
When using a KX-VC1000 that has not been expanded for 4 Point Built-in MCU support, one connection
can be established, and "Connection mode", "Site", and "Outgoing Bandwidth" are displayed for
"Connection mode 1", "Site 1", and "Outgoing Bandwidth / Site".
1
Press [MENU].
•
The Menu screen is displayed.
2
Select "Manual Dial" using [
[ENTER].
•
The manual dial screen is displayed. (The screen is
from when using the KX-VC1600 (with standard
features).)
Note
•
You can display the manual dial screen by
pressing [START] in the Home screen instead
of performing steps 1 and 2.
3
Use [
][
input ("Connection mode 1" to "Connection mode
3") and press [ENTER].
4
Use [
][
(SIP)", "IP Mode (H.323)", "NAT Traversal Mode").
5
Use [
][
6
When using IP mode, enter the IP address (or host
name), SIP URI (or SIP user name), H.323 extension,
H.323 name, or MCU's conference room number@IP
address. When using NAT Traversal mode, enter the
connection number (7 digits).
Note
•
When starting multiple-party video conference
calls, repeat steps 3-6.
•
When calling more than 4 parties, press [R] to
display the next page.
56
User Manual
][
] to select the connection mode you want to
] to select the connection mode ("IP Mode
] to select the site ("Site 1" to "Site 3").
] and press
1
2-5,
7-8
9
6
Document Version 2018-01
10
Advertisement
Table of Contents
