Table of Contents
Advertisement
–
"OFF": Audio is not input.
–
"Main Camera": Audio is input from the main
camera.
–
"Sub Camera": Audio is input from the sub
camera.
–
"PC" (default): Audio is input from PC-HDMI.
–
"Sub Camera + PC": Audio is input from the
sub camera and PC-HDMI.
"HDMI input gain for Audio": Press [ENTER], and
then select the audio input gain (+6 dB to -32 dB,
"OFF") (default: 0 dB).
"Output gain for HDMI inp. Audio": Press
[ENTER], and then select the audio output gain
(+6 dB to -32 dB, "OFF") (default: 0 dB).
Note
•
Even when audio input is set for "Main
Camera Audio input" or "HDMI Audio
input / content", if "HDMI input gain for
Audio" and "Output gain for HDMI inp.
Audio" are set to "OFF", audio will not be
output.
•
When "Main Camera" is selected for
"HDMI Audio input / content", set "Main
Camera Audio input" to "ON".
•
When a video camera with a microphone is
used, if "Main Camera Audio input" is set
to "ON" and "Output gain for HDMI inp.
Audio" is set to a setting other than
"OFF", feedback may occur.
3.
Press [G].
•
A dialogue box to confirm the saving of settings
is displayed.
4.
Use [
][
] to select "Yes" and press [ENTER].
•
The administrator menu screen is displayed.
Making GUI Settings
1.
Select "GUI Settings" and press [ENTER].
•
The GUI settings screen is displayed.
2.
Use [
][
] to select the following items for input:
Note
•
The following items are displayed over 2
pages. To view all the items, press [R] to
move to the next page, and press [B] to
move to the previous page.
•
""Y" Button during MCU" is not displayed
for the KX-VC1000.
Document Version 2018-01
•
When using a KX-VC1000 that has not
been expanded for 4 Point Built-in MCU
support, the following items are not
displayed.
–
""MCU Settings" Menu"
–
"Edit Profile"
""Settings" Menu": Use [
"ON" (default) or "OFF".
•
If you select "OFF", the settings screen is not
displayed even if you select "Settings" in the
menu screen.
""Select local site" Menu": Use [
"ON" (default) or "OFF".
•
If you select "OFF", the select local site screen
is not displayed even if you select "Select local
site" in the menu screen.
""Network Settings" Menu": Use [
select "ON" (default) or "OFF".
•
If you select "OFF", the network settings screen
is not displayed even if you select "Network
Settings" in the menu screen.
""Call set up" Menu": Use [
"ON" (default) or "OFF".
•
If you select "OFF", the connection settings
screen is not displayed even if you select "Call
set up" in the menu screen.
""Camera Settings" Menu": Use [
select "ON" (default) or "OFF".
•
If you select "OFF", the video camera setting
screen is not displayed even if you select
"Camera Settings" in the menu screen.
""MCU Settings" Menu": Use [
"ON" (default) or "OFF".
•
If you select "OFF", the MCU setting screen is
not displayed even if you select "MCU
Settings" in the menu screen.
"Active Home Menu": Use [
"ON" (default) or "OFF".
•
If you select "OFF", the guide is not displayed
in the Home screen. Pressing [FULL
SCREEN] on the remote control will switch
between displaying/hiding.
"Active Camera control Menu": Press [ENTER],
use [
][
] to select "Partially Hide" (default) or
"Fully Hide".
•
This setting determines the result when you
press [FULL SCREEN] on the remote control
to hide the guide area while using the camera
control screen during a video conference.
Contacts and Settings
][
] to select
][
] to select
][
] to
][
] to select
][
] to
][
] to select
][
] to select
User Manual
153
Advertisement
Table of Contents
