Table of Contents
Advertisement
Adding Parties to an Existing Video Conference Call
(Except Sub Sites)
A site in a 2-party video conference call or the Main Site can use the following operations to add parties to an
existing call.
Note
•
When using a KX-VC1000 that has not been expanded for 4 Point Built-in MCU support, "Make a
call" is not displayed and you cannot connect to another party during a video conference.
1.
Press [MENU].
•
The communication menu screen is displayed.
2.
Use [
][
][
•
A dialogue box to select a dialling method is displayed.
Note
•
For sites that are in a video conference call that was made using methods other than profile calling,
the dialogue box is not displayed, and the manual dial screen is displayed instead.
•
For sites that are in a video conference call that was made using profile calling with entry restriction
set to "ON" in the profile settings, the dialogue box is not displayed, and the profile used to make
the call is selected.
3.
Use [
][
] to select the dialling method ("Profile" or "Manual Dial").
When selecting profile:
•
The site selection screen is displayed.
1.
Select the site that you want to add using [
•
" " is displayed in the selection field.
Document Version 2018-01
][
] to select "Make a call" and press [ENTER].
][
] and press [ENTER].
During Video Conference Calls
User Manual
67
Advertisement
Table of Contents
