Table of Contents
Advertisement
Contacts and Settings
6.
Use [
][
] to select "Site" and press [ENTER].
•
The site selection screen is displayed.
Note
•
If there are no registered contacts with a
" " mark in the selection column, a call will
not be made even if [START] is pressed.
•
Press [Y] to return to the profile settings
screen (first page).
•
Up to 30 connections can be registered, but
the number of usable connections will be
automatically selected from the top after
invalid settings (""Not Registered"" and
"Connection mode (Call type)") are
excluded.
7.
Use [
][
] to select ""Not Registered"" and
press [B].
•
A dialogue box is displayed for selecting the
input method.
When "Input Address" is selected
•
The address input screen is displayed.
Use [
][
for input:
"Connection mode": Press [ENTER] and
use [
][
(communication type) and press [ENTER].
–
"IP Mode (SIP)" (default): SIP is used
for communication.
110
User Manual
] to select the following items
] to select the connection mode
–
"IP Mode (H.323)": H.323 is used for
communication.
–
"NAT Traversal Mode": NAT Traversal
Mode is used for communication.
"Address": Enter an IP address (or host
name), SIP URI (or SIP user name), H.323
extension, H.323 name, MCU's conference
room number@IP address, or connection
number.
Press [G].
•
The site selection screen is displayed.
When selecting "Contact list":
•
The contact list screen is displayed.
Use [
][
register, and press [ENTER].
•
The site selection screen is displayed.
When selecting "Call History":
•
The outgoing call history selection screen is
displayed.
Use [
][
register, and press [ENTER].
•
The site selection screen is displayed.
Note
•
After performing step 7, if you do not set
"Audio Mixing Site" or any of the items in
step 5, do not perform steps 8-11 and
proceed from step 12.
8.
Press [Y].
The profile settings screen (first page) is displayed.
9.
Use [
][
] to select "Audio Mixing Site" and
press [ENTER].
•
The audio mixing site screen is displayed.
Note
•
This setting is only necessary when "Other
Site's Audio" is set to "Mix (Selection)".
] to select the other party to
] to select the other party to
Document Version 2018-01
Advertisement
Table of Contents
