Canon BJ-W9000 Service Manual page 91

BJ-W9000
8) Paper Feed key
If pressed while "Offline" feeds the media forward so it lies over the platen ready to
be printed. If pressed when the media is already fed so as to lie over the platen, the
media will be fed continuously as long as the key is down.
9) Reverse Feed key
If pressed when the media has already been fed and is lying over the platen, winds
back the roll media into the media cassette.
If the paper edge has been advanced beyond the platen (that is, when the eject
sensor detects the paper), pressing the Reverse Feed key will not wind back the
media.
10) Paper Feed/Cut key
When the Auto Cut setting is off during a roll media print job, pressing this key at
any desired point will cut the paper there.
Pressing this key with roll media set on the cassette will cut the leading edge of the
roll media at approximately 70mm.
Also cancels the current job and ejects the media, if pressed during the pause state.
Ejects the cut sheet, if pressed when cut sheet media is loaded.
3-41
Part 3: Operations