Specifications - Canon BJ-W9000 Service Manual

Part 2: Product Specifications

2. SPECIFICATIONS

1. Type
2. Wind-up method
3. Cardbord tube for wind-up
4. Sliding range of cardbord tube holder
5. Applicable roll paper width for winding
6. Applicable paper type for winding
7. Maximum wind-up amount (diameter)
8. Winding rotation
9. Wind-up torque
10. Running noise
11. Operating environment
12. Power supply
13. Rating (current)
14. Weight
A built-in paper winding device.
Automatic (paper detected by pressing down the
actuator of sensor) and Manual.
2- or 3-inch cardboard tube. (One 2-inch cardboard
tube is supplied with the product. Any ordinary
cardboard tube, which is used as a core of the roll
paper, can also be used.)
420-1,092.2mm (43 inch paper)
24-42 inches
Thick coat paper, glossy paper and semi-glossy paper.
φ 150 mm or less (after getting rid of slack)
(Approximately one roll paper of φ 135 mm in diameter)
10.7rpm
0.392N•0m (4.0 Kgf•0cm)
50 dB (A) or less (including the running sound from the
BJ-W9000 printer)
Temperature: 5-35°C Humidity: 10-90% R.H.
DC24V+5%/–6%, DC5V+5%/–7% (supplied from the
BJ-W9000 printer)
200mA (24V), 100mA (5V)
11.5Kg (including the mounting brackets)
2-2
TU-01