Canon BJ-W9000 Service Manual page 59

BJ-W9000
6) Let the printer slide slowly down the ramp.
Screw
Stopper plate
b) Unpacking the accessory kit
Unpack the accessory kit and make sure that the items below have been included:
Power cord, operation panel sheet, user's manual, printer driver guide, installation
manual, printer driver CD-ROM, and quick reference.
NOTE
Handle
Hole on the ramp
Figure 3-9 Unpacking the Printer (2/2)
• Other types of power cords and operation panels are also available. Make
sure to use the correct type of accessory kit in accordance with the
region (country) where the printer is installed.
• A SCSI interface cable is needed to connect the printer to a computer.
Pad
Packing tape around the caster
Pin
Hole on the palette
3-9
Part 3: Operations