Canon BJ-W9000 Service Manual page 83

BJ-W9000
4.1.4 Loading cut sheet media
1) Align the right edge of the cut sheet with the media loadline, and insert the sheet
into the cut sheet feeding slot.
Verify that the print side is facing down.
The sheet will be fed forward and will stop over the platen when it has reached the
starting position.
NOTE
Cut sheet feeding area
Figure 3-31 Loading the Cut Sheet Media
You can not load the cut sheet media and print on the roll media. If the
roll media has been selected but cut sheet media is loaded, the printer will
eject the cut sheet automatically.
Likewise it is impossible to load the cut sheet media while the roll media is
being fed.
Media loadline
3-33
Part 3: Operations