Canon BJ-W9000 Service Manual page 65

BJ-W9000 Part 3: Operations
a) Mounting levels
Open the top cover and mount the cover switch tool (QY9-0103) to the top cover
sensor.
Open the lower-left cover, remove the waste-ink tank, and unfasten the four screws
from behind the tank.
After removing the screws, replace the waste-ink tank and close the lower-left cover.
Open the upper-right cover and the BJ print head locking cover while releasing the
hook locking the cover. Attach the levels using the removed screws, one on the right
edge of the carriage and the other on the mount on the front side.
Close the BJ print head locking cover and upper right cover.
BJ print head locking cover
Hook
Figure 3-15 Releasing the BJ Print Head Locking Cover
Cover switch tool
Levels
Screws
Figure 3-16 Mounting Levels
3-15