Activate Settings - Siemens SINAMICS G120 Function Manual

● Click the "Safety Inputs" button.
● Specify which F-DI-Status you want to transfer via PROFIsafe:
4.4.2.10

Activate settings

● Click "Copy parameters" and then click "Activate settings":
● If the password = 0 (factory setting), follow the prompts in order to set a password.
Safety Integrated Function Manual, SINAMICS G120
Function Manual, 07/2010, FW 4.3.2, A5E03052391B AA
Note
The F-DI status is transferred irrespective of whether you use the F-DI to activate a fail-
safe function.
If you try to set a password that is not permissible, the old password will not be changed.
Further information can be found in the section Password (Page 40).
Commissioning
4.4 Extended Safety
101