Electromechanical Sensor - Siemens SINAMICS G120 Function Manual

3.2.2.2

Electromechanical sensor

Inverter delivers supply voltage
Connect the 24 V supply of the inverter to the sensors and connect the reference potentials
of the inputs used to GND.
Figure 3-2
External power supply
Connect the external power supply to the sensors and connect the reference potentials of
the inputs used to the reference potential of the external power supply.
Figure 3-3
Safety Integrated Function Manual, SINAMICS G120
Function Manual, 07/2010, FW 4.3.2, A5E03052391B AA
Connecting an electromechanical sensor to the inverter power supply
Connecting an electromechanical sensor to an external power supply
Activation
3.2 Activation via F-DI
45