BridgeTech VB20 User Manual page 95

The Stream info field displays the following information if a complete stream other
than Ethernet is selected for relaying or recording:
Tuning state: The tuning is either 'locked' or 'unlocked', depending on round-
Monitoring
tuning:
Stream Id: The stream ID of the selected stream
Total bitrate: The total bitrate of the selected stream (including null packets)
Effective
bitrate:
Num PIDs: The number of PIDs contained within the selected stream
Num services: The number of services contained within the selected stream
The Service info field displays the following information if a service is selected for
relaying or recording:
Tuning: The tuning is either 'locked' or 'unlocked', depending on round-
Service Id: The service ID, as signalled in PAT
Name: The stream name, as signalled in SDT
Provider: The service provider, as signalled in NIT
Type: The service encoding format
Effective
bitrate:
PMT PID: The PMT PID associated with the service
PCR PID: The PCR PID associated with the service
ECM PIDs: The ECM PIDs associated with the service (if applicable)
Components: The service component PIDs and component types
When destination Relay over IP has been selected, the RDP parameters are:
IPv4-address: The unicast address or multicast address to forward to.
2014 © BRIDGE Technologies Co AS - Bentsebrugata 20 - N-0476 Oslo, Norway - tel: +47 22 38 51 00 -
96
Stream info
robin status.
The name of the stream currently selected
The effective bitrate of the selected stream (excluding null
packets)
Service info
robin status.
The service bitrate, i.e. the sum of bitrates for PIDs associated
with the service
RDP Ethernet
Multicast addresses are in the range 224.0.0.0 –
239.255.255.255.
PROBE USERS' MANUAL VERSION 5.0
www.bridgetech.tv