Setup - Login - BridgeTech VB20 User Manual

6.17.6 Setup - Login

By default, there is no access control and all users have access to all features. Access
control can be enabled for the probe, restricting users to read-only access until they
log in.
Any user can enable access control, but only users who are logged in can disable it or
change the password.
When access control is activated a READ-ONLY access message is displayed under
the alarm list for users that are not logged in. It will be necessary to log-in each time a
web browser application is launched and pointed at the probe.
Log-in is performed by providing the correct password. The default password is elvis.
The operator may define a new password that should be easy to remember.
PROBE USERS' MANUAL VERSION 5.0
2014 © BRIDGE Technologies Co AS - Bentsebrugata 20 - N-0476 Oslo, Norway - tel: +47 22 38 51 00 -
www.bridgetech.tv
229