Cofdm - Tuning Setup (Vb250) - BridgeTech VB20 User Manual

6.12.2 COFDM - Tuning setup (VB250)

In this view the operator can define frequencies that will be used by the COFDM
demodulator for tuning. A name is associated with each frequency, and this name will
be used by the probe when referring to the stream. The frequencies and some
associated key parameters are shown in the COFDM tuning list. Each entry in the list
may be edited by clicking the Edit field.
To add a new frequency to the list click the Add new tuning button. A pop-up window
will appear allowing the user to enter tuning parameters.
When one set of tuning parameters has been defined it is possible to click the button
Import from NIT in order to have the other frequencies automatically added to the
list, as defined in the Network Information Table(s) analysed by the probe. Default
values will be assigned to parameters that are not part of the NIT.
PROBE USERS' MANUAL VERSION 5.0
2014 © BRIDGE Technologies Co AS - Bentsebrugata 20 - N-0476 Oslo, Norway - tel: +47 22 38 51 00 -
www.bridgetech.tv
170