Etr 290 - Pcr - BridgeTech VB20 User Manual

PID: The PID for which the following parameters apply
Type: The type detected for this PID. For components the first
Bitrate: The current bitrate measurement for this PID. The bitrate is
Min Bitrate: The minimum bitrate measurement for this PID since the start
Max Bitrate: The maximum bitrate measurement for this PID since the start
Num CC errors: The number of CC errors for the specified PID. For the Ethernet
Carries PCR: If the PID carries Program Clock Reference information, this field
Scrambling: If the PID is scrambled, this field will show if it is scrambled with

6.9.7 ETR 290 - PCR

The PCR jitter histogram displays PCR jitter as measured by the probe.
2014 © BRIDGE Technologies Co AS - Bentsebrugata 20 - N-0476 Oslo, Norway - tel: +47 22 38 51 00 -
PID Details:
reference is used, i.e. if a PID an video component for one
service and PCR reference for another service, the PID type
displayed here will depend on which service is listed in first in
the PAT.
averaged over 1 second interval.
of the monitoring period. (I.e. when the probe tuned to the
frequency or when the monitoring of this frequency was
restarted by the user clicking on 'Clear status' in the 'ETR
Overview'.)
of the monitoring period.
interface the number of CC errors is measured from when the
probe started to monitor the multicast or when the user clicked
'Clear counters' in the 'Mon' page.
will be set to Yes
Odd or Even control word.
PROBE USERS' MANUAL VERSION 5.0
www.bridgetech.tv
129