BridgeTech VB20 User Manual page 139

Total monitoring
time:
ETR Priority 1: The time the stream has been affected by ETSI TR 101 290
ETR Priority 2: The time the stream has been affected by ETSI TR 101 290
ETR Priority 3: The time the stream has been affected by ETSI TR 101 290
No signal: The time the stream has been affected by 'No signal' alarm
CC errors: The time the stream has been affected by 'CC error' alarm
Interface errors: The time the stream has been affected by 'Interface error'
Other checks: The time the stream has been affected by miscellaneous
Pie charts indicate for how long the stream has been affected by errors compared to
the total monitoring time, green colour representing 'OK' and red colour 'Error'.
Service alarms
If a transport stream is selected for comparison the Service alarms subview displays
a list of services present in the stream. If there is one or more active alarms for a
service this will be indicated by a red 'bulb' whereas a green 'bulb' indicates no active
alarms. If a service is affected by one or more active alarms these alarms may be
viewed by expanding the service tree. If relevant the PIDs affected by alarms are also
displayed. Note that only alarms detected during the last monitoring period are
displayed.
If a service is selected for comparison this subview simply shows the selected service
2014 © BRIDGE Technologies Co AS - Bentsebrugata 20 - N-0476 Oslo, Norway - tel: +47 22 38 51 00 -
140
Error statistics
The total time the stream has been monitored by the ETR
engine
Priority 1 errors
Priority 2 errors
Priority 3 errors
alarm
'Other' alarms
PROBE USERS' MANUAL VERSION 5.0
www.bridgetech.tv