Etr 290 - Scte 35 (Option) - BridgeTech VB20 User Manual

6.9.9 ETR 290 – SCTE 35 (Option)
SCTE 35 is a specification which allows equipment to splice in local content at specific
times, SCTE 35 is basiclly just the signalling mechanism the equipment uses to know
when to switch from the master transmission to insert local content.
SCTE 35 requires a licence for the probe and also an ETR 290 engine to connect it to.
The SCTE 35 option enables monitoring of SCTE 35 events of all streams captured by
the ETR engines. Best practice is to have locked monitoring of the SCTE 35 streams to
get contineous monitoring.
The stream list parameters
Stream name: Name specified by the user when adding a multicast or tuning.
interface: The input source of the transport stream.
Services incl.
SCTE 35:
Events: The number of SCTE 35 events occurred in a transport stream.
Time since last
event:
If an ETR engine is monitoring a transport stream containing SCTE 35 information, the
current stream will be added to the list in the SCTE 35 menu. By pressing the blue
information button a new popup will show up, the popup will give specific information
2014 © BRIDGE Technologies Co AS - Bentsebrugata 20 - N-0476 Oslo, Norway - tel: +47 22 38 51 00 -
134
The number of services in the transport stream which has SCTE
35 information.
The time since last SCTE 35 event specified in seconds, minutes,
hours or days.
PROBE USERS' MANUAL VERSION 5.0
www.bridgetech.tv