BridgeTech VB20 User Manual page 209

ETR thresholds: Selection of the ETR threshold template that should be
PID thresholds: Selection of the PID threshold template that should be
Service
thresholds:
SAT thresholds: Selection of the SAT threshold template that should be
VBC thresholds: Selection of the VBC threshold template that should be
Disable tuning: Disable tuning for frequencies that should not be monitored. If
It is also possible to add new frequencies manually by copying existing tuning list
entries using the Duplicate highlighted button.
2014 © BRIDGE Technologies Co AS - Bentsebrugata 20 - N-0476 Oslo, Norway - tel: +47 22 38 51 00 -
210
assigned to the current frequency
assigned to the current frequency
Selection of the Service threshold template that should be
assigned to the current frequency
assigned to the current frequency
assigned to the current frequency
tuning for a stream is not disabled it will automatically be part
of the round-robin analysis loop.
PROBE USERS' MANUAL VERSION 5.0
www.bridgetech.tv