BridgeTech VB20 User Manual page 181

Rotated:
Num blocks:
Frame interval:
Time interleaver
length:
Time interleaver type:
In band A signalling:
In band B signalling:
In band B TS rate:
Payload:
Null packet detection:
Sub Slices per frame: The number of sub-slices per T2 Frame.
PLP count: The number of PLPs (Physical Layer Pipes) in the current
Aux count: Number of auxillary streams.
2014 © BRIDGE Technologies Co AS - Bentsebrugata 20 - N-0476 Oslo, Norway - tel: +47 22 38 51 00 -
182
"2/5" - DVB-T2 Lite only.
Indicates if constellation is rotated.
"True" or "False".
FEC: The FEC (Forward Error Correction) type used on this PLP.
"LDPC (Low-density parity-check) 16K (Short
FECFrame)",
"LDPC (Low-density parity-check) 64K (Long FECFrame)".
- DVB-T2 Base Only.
Maximum number of PLP blocks.
The T2 frame interval within the super frame of this PLP.
Time interleaver length.
Indicates type of Time Interleaver.
In-band A flag. Indicates whether PLP carries in-band
signalling.
"True" or "False".
In-band B flag, Indicates whether PLP carries in-band
signalling.
"True" or "False".
In-band B signalling TS rate.
The payload carried by the PLP.
"GFPS (Generic Fixed-length Packetized Stream)",
"GCS (Generic Continuous Stream)",
"GSE (Generic Encapsulated Stream)",
"TS (Transport Stream)"
Null packet detection indicator.
"True" or "False".
ISSY: Input Stream Synchronization Indicator.
"True" or "False".
Mode: PLP (Physical Layer Pipe) Mode.
"HEM (High Efficiency Mode)", "Normal":
DVB-T2 L1 Post Information
super frame.
PROBE USERS' MANUAL VERSION 5.0
www.bridgetech.tv